Dolphin pool cleaners are among the most popular robotic cleaners available, and for good reason. They're easy to use and provide impressive results. However, like any machine, they can experience problems from time to time that may necessitate a bit of troubleshooting. This article will cover some of the most common Dolphin cleaner issues, including:

The Cleaner Won't Start

If your Dolphin cleaner fails to turn on at all or is turning on and off continuously, the first thing to do is to check the power supply. Make sure the power cord is plugged in all the way and that the outlet has power. You should also check the circuit breaker to see if it needs to be reset or replaced.

A clogged impeller is another common problem. The impeller is what creates the suction that powers your Dolphin, so if it's blocked with debris, the device won't work. You can usually clear out this type of obstruction by removing the top lid of your cleaner and using a small brush to remove any loose dirt or debris.

The Dolphin Cleaner Gets Stuck

One of the most frustrating things a Dolphin owner can experience is when the cleaner gets stuck in one area of the pool. This can happen for a number of reasons, and it's important to know how to troubleshoot this issue quickly in order to resolve it.

The first thing to do is to make sure the hose is not kinked or blocked in any way. This can prevent the water from flowing through the hose and into the dolphin, so it's important to make sure there are no blockages present. You should also check to see if there is any debris in the hose itself, as this can cause the dolphin to stop moving around.

This can occur if the debris is too heavy for the robot to pull it across the bottom of the pool. In this case, it's important to move the cleaner around a bit and see if it can pull the debris over to another area of the pool. If you can't get the cleaner to move, it may be time to replace the tracks.

Another possible cause of this issue is that the cleaner's batteries are low. If this is the case, you will need to replace them in order for it to operate properly.

The Full Bag/Cartridge Indicator Light Is On

This is a common problem that can be caused by a variety of different factors, including an over-filling of the cleaner or a clogged filter. If this is the case, it's important to clean out the filter and then empty the cleaner before attempting to restart it again.

Having a working Dolphin pool cleaner can make your pool cleaning process much easier and faster, so it's important to know how to troubleshoot these types of issues when they arise. By following the tips in this article, you'll be able to get your Dolphin back up and running in no time.